How to Fix Samsung ML-1670 Printer with Firmware Reset
If you have a Samsung ML-1670 printer that is not working properly, you may need to reset its firmware. Firmware is the software that controls the printer's functions and settings. Sometimes, the firmware may get corrupted or outdated, causing problems such as paper jams, error messages, low print quality, or inability to print.
One way to fix these issues is to update the firmware with a file called FIX NU ML1670 V1.01.00.04.rar. This file contains a modified version of the firmware that can bypass the chip on the toner cartridge and reset the page counter. This means you can use any compatible toner cartridge without worrying about the chip or the printer's memory.
To use this file, you need to download it from a reliable source and follow these steps:
Turn off your printer and disconnect it from the power source.
Open the front cover of the printer and remove the toner cartridge.
Connect the printer to your computer with a USB cable.
Turn on your printer while holding down the power button for about 15 seconds.
The printer will enter download mode and display a green LED.
Run the FIX NU ML1670 V1.01.00.04.rar file on your computer and follow the instructions.
The file will detect your printer and start updating the firmware.
Wait until the process is complete and do not turn off your printer or computer.
The printer will reboot automatically and display a red LED.
Turn off your printer and reconnect it to the power source.
Insert the toner cartridge and close the front cover.
Turn on your printer and test its functions.
Congratulations! You have successfully fixed your Samsung ML-1670 printer with firmware reset. You can now enjoy printing without any problems.
Why do you need to reset the firmware of your Samsung ML-1670 printer? The main reason is to save money and reduce waste. The toner cartridge of this printer has a chip that communicates with the printer and tells it how much toner is left. When the chip detects that the toner is low or empty, it sends a signal to the printer to stop printing. This prevents you from using the remaining toner in the cartridge and forces you to buy a new one.
However, the chip is not always accurate and may report low or empty toner even when there is still some left. This means you are wasting toner and money by throwing away a partially used cartridge. Moreover, the chip is designed to work only with original Samsung toner cartridges, which are more expensive than compatible ones. If you try to use a compatible or refilled cartridge, the chip may reject it and display an error message.
By resetting the firmware of your Samsung ML-1670 printer, you can override the chip and use any toner cartridge you want. You can also reset the page counter of the printer and print as many pages as you need. This way, you can save money by using cheaper or refilled cartridges, and reduce waste by using up all the toner in the cartridge. c481cea774